双氧水灌装计量实现半自动灌装的技术改造

简述双氧水灌装计量在实际应用中存在的缺点,介绍了解决该问题的具体实施方案,对该灌装计量升级改造前后做了比较和分析。     

联合时变低通与改进形态学滤波的智能在线称量方法研究

针对检重秤在复杂工业生产环境下,受机械传动、被测物体自身振动和外界随机扰动影响导致的传感器输出信噪比低、称量准确性难以满足要求等问题,提出一种联合时变低通与改进形态学的快速数据处理新方法:时变低通滤波器作为一级滤波,通过在信号跃变时,迭代优化滤波器参数,使边沿信号得以快速响应,有效消除冲击干扰,并抑制称重信号在滤波过程中的相位失真;然后采用改进形态学滤波器进行二级滤波,通过选择零值线性结构元素,并优化结构元素长度以及操作算子的权值系数,加快了动态称重的响应速度。实验结果表明,该方法能有效抑制各类干扰影响,提高测量准确度,最终实现运行速度达120 m/min,最大秤量400.0 g,满足国家标准《GB/T 27739—2011自动分检衡器》XIII级要求的检重秤搭建。     

BGC-100抱罐车研制

针对国内现代化钢厂规模化生产对研制大吨位抱罐车提出的要求,研制了BGC-100式抱罐车.介绍了BGC-100式抱罐车的结构组成,技术特征及创新点.     

Precision nutrition: weighing feed ingredients correctly

The ability to mix a quality feed is often equated to the quality of the mixer; the ability to weigh ingredients correctly has received little attention. To assess how accurately feed mills weigh their ingredients, 14 feed mills specialising in swine diets were surveyed, which yielded 8432 data points (for 229 ingredients and 11–44 batch records per ingredient within mills). Amounts actually weighed (according to scale readings) were compared to calls, and differences were analysed statistically. Feed mills overdosed ingredients by 1.5 ± 16.3%: between mills, overdosing ranged from ?0.7 to 13.0%. Within ingredients, weighing variation ranged from 0.6 to 11.1% between mills and averaged 5.2%. Some of the weighing problems observed were attributed to discrepancies between the call size and the scale resolution. For example, weighing 11.3 units (pounds) on a scale with a 2 unit resolution leads to a minimum error of 6%. Such problems occurred for 8.7% of the calls and resulted in a minimum error ranging from 0.01 to 20%, averaging 1.95%. Poor choice of scales was the major source of errors in weighing, and the relationship weighing variation = 10^∧ [1.56 ? 0.50 log (call/scale resolution)] explained 40% of the variation observed (p < 0.05). Weighing ingredients in the right scale would thus not only benefit feed quality but also reduce diet cost, as it would reduce the overdosing of ingredients. © 2001 Society of Chemical Industry     

包钢带钢厂热轧带钢在线电子辊道秤研制

热轧带钢在线电子辊道秤的研制，成功地实现了带钢的在线称量问题，本文介绍了某设计思想、设备结构特点、使用效果。     

一种煤矿箕斗PLC称重系统的研究

根据原来煤矿矿山立井箕斗灌煤无称重装置、安装空间狭窄和不能采用安装直接称重装置的现场情况,初步研究了基于压力传感器的煤流量自动计算原理和计算方法,提出了PLC灌煤系统间接称重改造方案;另外,还提出了另一种基于模糊控制原理的PLC灌煤系统间接称重改造方案。     

X射线称重原理与实现方法

通过对X射线产生原理的理解,设计了一种新型称重设备,扩展了X射线应用技术领域,并主要针对工程上的实现,如结构特点、电气原理等进行了简单阐述。     

《电子称重仪表》新老国标的对比

本文对比了电子称重仪表新旧国标的差异,介绍了新国标中部分条款修改的原因和依据。     

钼铁矿自动化计量机械系统改进设计与应用

针对原有大颗粒、高比重钼铁矿计量机械部分由于设计缺陷导致的各称重传感器受力不均衡、精度不高、称重偏差较大、自动化程度相对较低等问题,结合生产工艺条件,综合利用静态称重的低成本、高精度与动态称重的高效率优点,对称体结构进行优化设计。节约了成本,降低了操作人员的劳动强度,提高了生产效率,满足了生产需求。     

一种动态自动称量技术

针对某些发射药颗粒较大,不能满足快速、精确称量的问题,设计一种动态自动称药控制系统。该系统主要采用皮带送药技术、气动震盘送药技术和在一定范围设置称药量值进行称量技术,通过粗加药与精加药比重的控制方法和设置控制提前量的控制策略,实现了大颗粒发射药的动态自动称量,并已在某发射药自动称量机项目中成功应用。实践结果证明:该技术降低了工人的劳动强度,提高了生产效率。